-
Thermal Paste - Suits all OEM ignition Igniters -
O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. -
O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung -
Plug and Pins Only -Suit 1 Bar GM MAP Sensor (Green) Suits: HT-010100 - 1Bar GM Map Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange Suits: HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector Suits: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Bosch 3 Pin Junior Timer Female Connector Suits: HT-010402 - Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft HT-010404 - Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft Includes: Pack of 3 Pins. -
CAN Keypad Label Set Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. -
Daisy-chain Cable for Haltech Multi-Function CAN Gauge -
Extension Cable for Haltech Multi-Function CAN Gauge Length: 150cm (5) -
Linear Position Sensor - 1/2" - 250mm Travel Suits: Haltech Linear Position Sensors Includes: 1 x Weld On Tab Notes: Suits 1/2" Bodied Linear Position Sensors - 5/32" / 4mm Mounting Hole Length: 50mm -
Plug and Pins Only - Bosch 4 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (Coil output/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor Includes: Pack of 4 Pins. -
Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (ECU control/Switch side only) Includes: Pack of 5 Pins. -
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes: Suits aftermarket ECUs using the AMP Superseal 1.0 Series Connector Terminated with 2 x Pins to suit connector. -
CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm Length: 200mm -
Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins. -
Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector Suits: HT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter Includes: Pack of 7 Pins. -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A -
Split Collar Shock Sensor Mount -7/8" / 22.225mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1" / 25.4mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/8" / 28.575mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/4" / 31.75mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/2" / 38.1mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 5/8" / 41.275mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6 Suits: NEXUS Series devices Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness Notes: PlugnPlay with NEXUS series harnesses -
NTK Wideband Adaptor Harness For NEXUS Series Devices Suits: NEXUS Series Devices Includes: 1 x HT-010727 NTK to DTM-6 Harness Length: 1.2M (4ft) -
Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP superseal pins for easy installation into your ECU Length: 400mm -
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes: Use with Link Plug-in range of ECUs
-
CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play -
SurLok Connector-120A (Red) - Suits Nexus PD16 Suits: Nexus PD16 Includes: 1 x 120A Red SurLok Connector -
Pressure Sensor Extension Kit Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated P-Clamps. Length: 450mm (18") -
Plug and Pins Only - Flex Fuel Composition Sensor Includes: Pack of 3 pins. -
Plug and Pins Only - 16 Pin Tyco 16 Pin TYCO Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 Plug n Play Adaptor Harness Auxillary I/O Includes: Pack of 16 Pins. -
Elite 2000/2500 Ignition Harness For Ford Barra 4.0 BA/BF Suits: Ford Barra 4.0L BA/BF Includes: Elite 2000/2500 Ignition Sub-Harness for Ford Barra Notes: * Use with Terminated Engine Harness ( HT-141388 or HT-141389) sold separately. -
Haltech iC-7 OBDII to CAN Cable Suits: Haltech iC-7 Dash Includes: Cable and Fuse Length: 1400mm / 55in -
Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband harness, Bosch LSU 4.9 connector, ECU pins. Length: 1.2m -
Dual Switch Panel Only Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required. -
Linear Position Sensor - 1/2" - 250mm Travel Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: 1 1/2" / 38.2mm -
Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft) -
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector) Notes: Suits Dual-Connector Link ECUs Wiring of input power required
-
Triple Switch Panel Only Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required. -
Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings. -
Plug and Pins Only - 24 Pin Tyco Suits: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 Includes: Pack of 24 Pins. -
Sport to Elite Harness upgrade kit Includes: 13 Colour-coded 2.5m/8ft wires pre-crimped with pins to suit AMP Superseal Connectors and 2 blanking pins. Length: 2.5m (8) -
Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector Suits: HT-020032 - HPI4 - High Power Igniter HT-020036 - HPI6 - High Power Igniter HT-020040 - HPI8 - High Power Igniter -
iC-7 Standard Dash Mount Suits: Haltech iC-7 Display Dash Includes: 1 x 2.5mm Black Annodized Aluminium Bracket Notes: Suits Haltech iC-7 Display Dash -
High Output Inductive Coil Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must be used with an ignitor ignitor/module. -
High Output IGN-1A Inductive Coil to GM LS V8 Adaptor Sub-harness Suits: A direct Plug n Play solution to add high output IGN-1A inductive coils to all Haltech LS V8 terminated engine harnesses with the the OEM style 7 Pin coil harness connector. Must be in conjunction with an IGN-1A Coil harness (HT-130306) or IGN-1A harness with coils kit (HT-130312). Includes: Adaptor Sub-harness. Notes: Does NOT include 8 channel IGN-1A coil harness, IGN-1A coils, or LS terminated engine harness. Please order separately if required. -
iC-7 Mounting Bracket with Integrated Visor Suits: Haltech iC-7 Display Dash Includes: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo Notes: Suits Haltech iC-7 Display Dash -
12 Position Rotary Trim Module (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014) -
Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors. -
Tacho Output Adaptor Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO on ECU -
Elite PRO Direct Plug-in and IC-7 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 Pin 4 Row 4 Keyway 1 x DTM 4 Can Connector 15 x Spare Pins to suit AMP Connector 30 x Sealing Plugs Notes: Harness Is included in ELite Pro Plugins and IC-7 Display Dash. Purchase if replacement required Size: 300mm 12" -
iC-7 Tube Mount For tube OD 1.25in (31.75mm) Suits: iC-7 Mounting Brackets (HT-060070 and HT-060071) Includes: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket Mounting Screws 4 x Zinc M6 x 25 Assembly Screws Notes: Designed to mount optional dash mounting brackets HT-060070 or HT-060071 (sold seperately) to 1.25in (31.75mm) OD tube. Size: 60mm x 44mm -
"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) -
GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) Size: 18mm Diameter -
LS1 Coil with built-in Ignitor Includes: Matching plug and pins. -
High Output IGN-1A Inductive Coil with built-in ignition module Includes: Matching plug and pins.
-
Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. -
Analogue Output Adaptor Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors. -
Nissan Attesa 4WD TPS Adaptor Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a standalone ECU. Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors. Notes: Not required for use with the Haltech Plug n Play Adaptor Harness or Platinum PRO Direct Plug-in range. -
Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 1.812" / 46mm Driveshaft Size: ID: 1.812" / 46mm -
Haltech Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup collar - suits 1.875"/ 47.63mm Driveshaft Size: ID : 1.875" / 47.63mm -
Haltech Driveshaft Split Collar 2.125" / 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 2.125" / 53.98mm Driveshaft Size: ID 2.125" / 53.98mm -
Haltech Driveshaft Split Collar 2.187" 55.55mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187" 55.55mm I.D. 8 Magnet Notes: 8 magnet pickup split collar - suits 2.187" Driveshaft Size: ID : 2.187" 55.55mm
-
Nexus PD16 Tube Mount Kit 1.25" Includes: 1 x Mounting Plate and hardware 2 x 1.25" / 31.75mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Nexus PD16 Tube Mount Kit 1.625" Suits: Nexus PD16 Includes: 1 x Mounting Plate and hardware 2 x 1.625" / 41.275mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm
-
Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 167mm
-
Platinum PRO/Sport GM Plug-in Auxiliary I/O Harness Length: 2.5m (8) -
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm
-
High Output IGN-1A Inductive Coil to GM LS V8 Adaptor Sub-harness Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) -
iC-7 Moulded Panel Mount Suits: Haltech iC-7 Display Dash Includes: 1 x iC-7 Moulded Panel Mount- Black Notes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic Size: 250mm x 500mm (10" x 20") -
Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector) -
N2 OIL BLOCK ADAPTOR SR20 Nissan Silvia S13 S14 S15 180SX -
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Includes: Includes 1 x AMP 34 Position Connector Key1 + pins 1 x AMP 34 Position Connector Key2 + Pins 1 x DTP 4 Position Deutsch Connector Wedge and Pins Notes: Used to construct harness for Nexus R3 VCU's -
GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology. Length: 300mm -
Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Isolated Mount 1 x Mounting Bracket with fitting hardware -
NEXUS R5 Tube Mount Kit - 1.25" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.25" Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish. -
NEXUS R5 Tube Mount Kit - 1.625" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.625" Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish. -
IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8) -
HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78") -
HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78") -
HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78") -
ADJUSTABLE CAM GEAR SR20DE SR20 DET S13 S14 S15 Nissan Silvia 180SX -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector. -
3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001) -
To be purchased with DGR High Performance Coilover Kits for Street
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 227mm
-
4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)
-
Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opposing Connector 3 x Pins -
Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotation 1 x Opposing Connector 3 x Pins Notes: Counter Clockwise Rotation
-
Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins. -
DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S with Pins and Wedge 1 x DT06-4S with Pins and Wedge 1 x DTM06-4S - with Pins and Wedge 1 x DTM04-4P- with Pins and Wedge 1 x Quick Start Guide Notes: Works with Nexus Series, Elite Series and Platinum Series ECUs Requires 2 x DPO outputs from ECU to control ( Active State = Low) Size: 86mm x 55.5mm -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 277mm
-
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: O2 Sensor, 1.2m extension cable and weld-on bung. -
LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plug and Play with NEXUS Series Harnesses -
Dual Switch Panel Kit Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules. -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 327mm
-
Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modified Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. -
Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable Ties Notes: Use with HT-010001 - iC-7 Sensor Pack -
HEAD GASKET SR20DE SR20DET S13 S14 S15 Nissan Silvia 180SX -
NTK Wideband Hardware Pack Suits: NEXUS Series devices Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung Notes: PlugnPlay with NEXUS Series Harnesses -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 377mm
-
Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins. -
TH400 (Reid Case) Transmission Selector Position Kit Suits: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other brand / transmissions. Works with Elite, Nexus series ECUs, iC-7 Digital Displays, also other aftermarket stand-alone ECUs. Includes: 1 x Mounting Bracket 2 x 5/16 x 1/2" Mounting Bolts 2 x #8-32 x 3/4" Nylon Mounting Bolts 2 x #8-32 Nylock Nuts 1 x HT-011201 Linear Position Sensor - 50mm Travel Notes: With this kit fitted, the gear position can be displayed on a digital dash (like the iC-7) giving the driver immediate notification of the gear change and position. This in turn allows the tuner to map and implement various gear-based strategies from idle control, boost control to starter motor lockout or reverse light activation. -
TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide Notes: Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years -
TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide Notes: Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years -
Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins. -
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103 -
250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
-
Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size: 8mm D-Shaft -
Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
Call Us (07) 5400 5674[email protected]
