-
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes: Suits aftermarket ECUs using the AMP Superseal 1.0 Series Connector Terminated with 2 x Pins to suit connector. -
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector) Notes: Suits Dual-Connector Link ECUs Wiring of input power required
-
Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins. -
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 277mm
-
TH400 (Reid Case) Transmission Selector Position Kit Suits: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other brand / transmissions. Works with Elite, Nexus series ECUs, iC-7 Digital Displays, also other aftermarket stand-alone ECUs. Includes: 1 x Mounting Bracket 2 x 5/16 x 1/2" Mounting Bolts 2 x #8-32 x 3/4" Nylon Mounting Bolts 2 x #8-32 Nylock Nuts 1 x HT-011201 Linear Position Sensor - 50mm Travel Notes: With this kit fitted, the gear position can be displayed on a digital dash (like the iC-7) giving the driver immediate notification of the gear change and position. This in turn allows the tuner to map and implement various gear-based strategies from idle control, boost control to starter motor lockout or reverse light activation. -
Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 167mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 377mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 327mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 227mm
-
Laser Ride Height Sensor Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective glass lens and setup guide. Length: 25mm (1") to 500mm (19.5") Range -
GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology. Length: 300mm -
Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Isolated Mount 1 x Mounting Bracket with fitting hardware -
Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). -
Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). -
Suits: Nexus R3 Includes: 3 x Main ECU connectors 3 x CAN Connectors 1 x Wideband Connector 1 x Firewall Grommet Fully populated with TXL wire
Call Us (07) 5400 5674[email protected]
