-
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes: Use with Link Plug-in range of ECUs
-
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector) Notes: Suits Dual-Connector Link ECUs Wiring of input power required
-
Elite PRO Direct Plug-in and IC-7 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 Pin 4 Row 4 Keyway 1 x DTM 4 Can Connector 15 x Spare Pins to suit AMP Connector 30 x Sealing Plugs Notes: Harness Is included in ELite Pro Plugins and IC-7 Display Dash. Purchase if replacement required Size: 300mm 12"
-
Nexus PD16 Tube Mount Kit 1.25" Includes: 1 x Mounting Plate and hardware 2 x 1.25" / 31.75mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Nexus PD16 Tube Mount Kit 1.625" Suits: Nexus PD16 Includes: 1 x Mounting Plate and hardware 2 x 1.625" / 41.275mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm
-
Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 167mm
-
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm
-
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Includes: Includes 1 x AMP 34 Position Connector Key1 + pins 1 x AMP 34 Position Connector Key2 + Pins 1 x DTP 4 Position Deutsch Connector Wedge and Pins Notes: Used to construct harness for Nexus R3 VCU's
-
GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology. Length: 300mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 227mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 277mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 327mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 377mm
-
TH400 (Reid Case) Transmission Selector Position Kit Suits: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other brand / transmissions. Works with Elite, Nexus series ECUs, iC-7 Digital Displays, also other aftermarket stand-alone ECUs. Includes: 1 x Mounting Bracket 2 x 5/16 x 1/2" Mounting Bolts 2 x #8-32 x 3/4" Nylon Mounting Bolts 2 x #8-32 Nylock Nuts 1 x HT-011201 Linear Position Sensor - 50mm Travel Notes: With this kit fitted, the gear position can be displayed on a digital dash (like the iC-7) giving the driver immediate notification of the gear change and position. This in turn allows the tuner to map and implement various gear-based strategies from idle control, boost control to starter motor lockout or reverse light activation.
-
Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.