-
GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) Size: 18mm Diameter
-
LS1 Coil with built-in Ignitor Includes: Matching plug and pins.
-
High Output IGN-1A Inductive Coil with built-in ignition module Includes: Matching plug and pins.
-
Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.
-
Analogue Output Adaptor Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.
-
Nissan Attesa 4WD TPS Adaptor Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a standalone ECU. Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors. Notes: Not required for use with the Haltech Plug n Play Adaptor Harness or Platinum PRO Direct Plug-in range.
-
Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 1.812" / 46mm Driveshaft Size: ID: 1.812" / 46mm
-
Haltech Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup collar - suits 1.875"/ 47.63mm Driveshaft Size: ID : 1.875" / 47.63mm
-
Haltech Driveshaft Split Collar 2.125" / 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 2.125" / 53.98mm Driveshaft Size: ID 2.125" / 53.98mm
-
Haltech Driveshaft Split Collar 2.187" 55.55mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187" 55.55mm I.D. 8 Magnet Notes: 8 magnet pickup split collar - suits 2.187" Driveshaft Size: ID : 2.187" 55.55mm
-
Nexus PD16 Tube Mount Kit 1.25" Includes: 1 x Mounting Plate and hardware 2 x 1.25" / 31.75mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Nexus PD16 Tube Mount Kit 1.625" Suits: Nexus PD16 Includes: 1 x Mounting Plate and hardware 2 x 1.625" / 41.275mm Tube Clamps 4 x M6 Anti Vibration Mounts
-
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm
-
Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 167mm
-
Platinum PRO/Sport GM Plug-in Auxiliary I/O Harness Length: 2.5m (8)
-
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm
-
High Output IGN-1A Inductive Coil to GM LS V8 Adaptor Sub-harness Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)
-
iC-7 Moulded Panel Mount Suits: Haltech iC-7 Display Dash Includes: 1 x iC-7 Moulded Panel Mount- Black Notes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic Size: 250mm x 500mm (10" x 20")
-
Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
-
N2 OIL BLOCK ADAPTOR SR20 Nissan Silvia S13 S14 S15 180SX
-
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Includes: Includes 1 x AMP 34 Position Connector Key1 + pins 1 x AMP 34 Position Connector Key2 + Pins 1 x DTP 4 Position Deutsch Connector Wedge and Pins Notes: Used to construct harness for Nexus R3 VCU's
-
GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology. Length: 300mm
-
NEXUS R5 Tube Mount Kit - 1.25" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.25" Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish.
-
NEXUS R5 Tube Mount Kit - 1.625" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.625" Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish.
-
ADJUSTABLE CAM GEAR SR20DE SR20 DET S13 S14 S15 Nissan Silvia 180SX
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.
-
To be purchased with DGR High Performance Coilover Kits for Street
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 227mm
-
Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opposing Connector 3 x Pins
-
Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotation 1 x Opposing Connector 3 x Pins Notes: Counter Clockwise Rotation
-
Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.
-
DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S with Pins and Wedge 1 x DT06-4S with Pins and Wedge 1 x DTM06-4S - with Pins and Wedge 1 x DTM04-4P- with Pins and Wedge 1 x Quick Start Guide Notes: Works with Nexus Series, Elite Series and Platinum Series ECUs Requires 2 x DPO outputs from ECU to control ( Active State = Low) Size: 86mm x 55.5mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 277mm
-
LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plug and Play with NEXUS Series Harnesses
-
Dual Switch Panel Kit Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 327mm
-
Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modified Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip.
-
Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable Ties Notes: Use with HT-010001 - iC-7 Sensor Pack