-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A -
Split Collar Shock Sensor Mount -7/8" / 22.225mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1" / 25.4mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/8" / 28.575mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/4" / 31.75mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/2" / 38.1mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 5/8" / 41.275mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Plug and Pins Only - Bosch 4 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (Coil output/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor Includes: Pack of 4 Pins. -
"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) -
Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins. -
Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) -
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm -
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm
-
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Plug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange Suits: HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor Includes: Pack of 3 Pins. -
5 Bar "TI" MAP Sensor Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103 -
Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector Suits: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor Includes: Pack of 3 Pins. -
7 Bar "TI" MAP Sensor Includes: Matching plug and pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103 -
4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001) -
3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)
-
5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
-
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103 -
250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
-
Pressure Sensor Extension Kit Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated P-Clamps. Length: 450mm (18") -
Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opposing Connector 3 x Pins -
Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotation 1 x Opposing Connector 3 x Pins Notes: Counter Clockwise Rotation
-
Plug and Pins Only - Bosch 3 Pin Junior Timer Female Connector Suits: HT-010402 - Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft HT-010404 - Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft Includes: Pack of 3 Pins. -
Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size: 8mm D-Shaft -
Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins. -
O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung -
12 Position Rotary Trim Module (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014) -
Dual Switch Panel Kit Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules. -
Dual Switch Panel Only Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required. -
Triple Switch Panel Only Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required. -
Triple Switch Panel Kit Includes: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules. -
IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8) -
Plug and Pins Only - 16 Pin Tyco 16 Pin TYCO Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 Plug n Play Adaptor Harness Auxillary I/O Includes: Pack of 16 Pins. -
Plug and Pins Only - 24 Pin Tyco Suits: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 Includes: Pack of 24 Pins. -
IO 12 Expander - 12 Channel (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander, Elite CAN cable DTM-4 to 8 pin Black Tyco - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility) -
IO 12 Expander- 12 Channel (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander, Elite CAN cable DTM-4 to 8 pin Black Tyco - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility)
-
IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander with matching 24 Pin TYCO plug and Pins, Elite CAN cable DTM-4 to 8 pin Black TYCO - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility)
-
IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander with matching 24 Pin TYCO plug and Pins, Elite CAN cable DTM-4 to 8 pin Black TYCO - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility)
-
IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander with matching flying lead harness, Elite CAN cable DTM-4 to 8 pin Black TYCO - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN Identifier IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility) Length: 2.5m (8)
-
IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander with matching flying lead harness, Elite CAN cable DTM-4 to 8 pin Black TYCO - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN Identifier IDs (Box A or B) for up to 24 additional channels (subject to ECU compatibility) Length: 2.5m (8)
-
Plug and Pins Only - Flex Fuel Composition Sensor Includes: Pack of 3 pins. -
Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings. -
Plug and Pins Only -Suit 1 Bar GM MAP Sensor (Green) Suits: HT-010100 - 1Bar GM Map Sensor Includes: Pack of 3 Pins. -
WB1 Bosch - Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs. Length: 1.2M (4ft) -
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes: Suits aftermarket ECUs using the AMP Superseal 1.0 Series Connector Terminated with 2 x Pins to suit connector. -
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector) Notes: Suits Dual-Connector Link ECUs Wiring of input power required
-
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes: Use with Link Plug-in range of ECUs
-
O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. -
Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband harness, Bosch LSU 4.9 connector, ECU pins. Length: 1.2m -
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: O2 Sensor, 1.2m extension cable and weld-on bung. -
Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft) -
WB2 Bosch - Dual Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs. Length: 1.2M (4ft)
Call Us (07) 5400 5674[email protected]
