-
GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology. Length: 300mm -
TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide Notes: Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years -
TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide Notes: Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years -
Thermal Paste - Suits all OEM ignition Igniters -
Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector Suits: HT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter Includes: Pack of 7 Pins. -
Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins. -
Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins. -
Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins. -
Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (ECU control/Switch side only) Includes: Pack of 5 Pins. -
HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only -
HPI6 - High Power Igniter - 15 Amp Six Channel Module Only -
HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 227mm -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 277mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 327mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 377mm
-
Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 167mm
-
TH400 (Reid Case) Transmission Selector Position Kit Suits: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other brand / transmissions. Works with Elite, Nexus series ECUs, iC-7 Digital Displays, also other aftermarket stand-alone ECUs. Includes: 1 x Mounting Bracket 2 x 5/16 x 1/2" Mounting Bolts 2 x #8-32 x 3/4" Nylon Mounting Bolts 2 x #8-32 Nylock Nuts 1 x HT-011201 Linear Position Sensor - 50mm Travel Notes: With this kit fitted, the gear position can be displayed on a digital dash (like the iC-7) giving the driver immediate notification of the gear change and position. This in turn allows the tuner to map and implement various gear-based strategies from idle control, boost control to starter motor lockout or reverse light activation. -
Linear Position Sensor - 1/2" - 250mm Travel Suits: Haltech Linear Position Sensors Includes: 1 x Weld On Tab Notes: Suits 1/2" Bodied Linear Position Sensors - 5/32" / 4mm Mounting Hole Length: 50mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: 1 1/2" / 38.2mm -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A -
Split Collar Shock Sensor Mount -7/8" / 22.225mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1" / 25.4mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/8" / 28.575mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/4" / 31.75mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/2" / 38.1mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 5/8" / 41.275mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Plug and Pins Only - Bosch 4 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (Coil output/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor Includes: Pack of 4 Pins. -
"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) -
Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins. -
Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) -
Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 217mm
-
Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 267mm
-
Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 317mm
-
Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mounting bolts recommended for sensor protection Length: Between Mounting Holes (Closed) 367mm
-
Plug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange Suits: HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor Includes: Pack of 3 Pins. -
5 Bar "TI" MAP Sensor Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103 -
Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector Suits: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor Includes: Pack of 3 Pins.
Call Us (07) 5400 5674[email protected]
