-
Thermal Paste - Suits all OEM ignition Igniters -
O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. -
O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung -
Plug and Pins Only -Suit 1 Bar GM MAP Sensor (Green) Suits: HT-010100 - 1Bar GM Map Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange Suits: HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector Suits: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor Includes: Pack of 3 Pins. -
Plug and Pins Only - Bosch 3 Pin Junior Timer Female Connector Suits: HT-010402 - Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft HT-010404 - Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft Includes: Pack of 3 Pins. -
CAN Keypad Label Set Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. -
Daisy-chain Cable for Haltech Multi-Function CAN Gauge -
Extension Cable for Haltech Multi-Function CAN Gauge Length: 150cm (5) -
Linear Position Sensor - 1/2" - 250mm Travel Suits: Haltech Linear Position Sensors Includes: 1 x Weld On Tab Notes: Suits 1/2" Bodied Linear Position Sensors - 5/32" / 4mm Mounting Hole Length: 50mm -
Plug and Pins Only - Bosch 4 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (Coil output/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor Includes: Pack of 4 Pins. -
Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connector Suits: HT-020006 - Quad Channel OEM Igniter (ECU control/Switch side only) Includes: Pack of 5 Pins. -
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes: Suits aftermarket ECUs using the AMP Superseal 1.0 Series Connector Terminated with 2 x Pins to suit connector. -
CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm Length: 200mm -
Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins. -
Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector Suits: HT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter Includes: Pack of 7 Pins. -
Linear Position Sensor - 1/2" - 250mm Travel Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A -
Split Collar Shock Sensor Mount -7/8" / 22.225mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1" / 25.4mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/8" / 28.575mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/4" / 31.75mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 1/2" / 38.1mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
Split Collar Shock Sensor Mount -1 5/8" / 41.275mm Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting bolts Length: N/A
-
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6 Suits: NEXUS Series devices Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness Notes: PlugnPlay with NEXUS series harnesses -
NTK Wideband Adaptor Harness For NEXUS Series Devices Suits: NEXUS Series Devices Includes: 1 x HT-010727 NTK to DTM-6 Harness Length: 1.2M (4ft) -
Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP superseal pins for easy installation into your ECU Length: 400mm -
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes: Use with Link Plug-in range of ECUs
-
CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play -
SurLok Connector-120A (Red) - Suits Nexus PD16 Suits: Nexus PD16 Includes: 1 x 120A Red SurLok Connector -
Pressure Sensor Extension Kit Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated P-Clamps. Length: 450mm (18") -
Plug and Pins Only - Flex Fuel Composition Sensor Includes: Pack of 3 pins. -
Plug and Pins Only - 16 Pin Tyco 16 Pin TYCO Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 Plug n Play Adaptor Harness Auxillary I/O Includes: Pack of 16 Pins. -
Elite 2000/2500 Ignition Harness For Ford Barra 4.0 BA/BF Suits: Ford Barra 4.0L BA/BF Includes: Elite 2000/2500 Ignition Sub-Harness for Ford Barra Notes: * Use with Terminated Engine Harness ( HT-141388 or HT-141389) sold separately. -
Haltech iC-7 OBDII to CAN Cable Suits: Haltech iC-7 Dash Includes: Cable and Fuse Length: 1400mm / 55in -
Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband harness, Bosch LSU 4.9 connector, ECU pins. Length: 1.2m -
Dual Switch Panel Only Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required.
Call Us (07) 5400 5674[email protected]
