The feedback we are getting from customers about our new intake manifolds we have brought to the market here in Australia is amazing! We are all about genuine brands & high quality parts but we found that there was a serious lacking in a fairly priced forward facing intake manifold for most of the import model cars. RB’s JZ’s etc. So we set out to find a manufacture that could produce a high quality manifold with CNC alloy, a big enough plenum chamber, designed correctly so no cylinders lean out & high quality craftsmanship with the welding & assembling etc. We successfully found one & started producing these manifolds & have started selling them to the public.
This Intake Manifold Kit Includes:
- Billet CNC Aluminium Manifold (Suit SR20DET NON VCT or VCT)
- 76mm Throttle Body
- Dual Feed Fuel Rail (Suit Top Feed 14mm Full Length Injectors)
- IACV Port & Vac Line Ports
- 12 Months LIMITED Warranty
FREE SHIPPING WORLDWIDE!
Our manifolds have been flow tested & compared to other manifolds on the market. Our manifolds pass pressure testing at 50 PSI with no issues or problems & flow test results proved that ours have a better flow average per minute & a increase of more then 50% in air mass compared to the factory manifold for the SR20DET.
Dyno results on this manifold saw an increase of 50HP with just a retune after fitting the manifold. Bare in mind your experience may vary depending on turbo setup. This manifold is suited for SR20 enthusiasts looking for mid & top end power. If you want to get the absolute best performance out of this manifold you need to run bigger cams or a stroker kit.
We know that personalising your engine bay is something everyone is passionate about so we have the option of anodising them black or keeping them silver.
This manifold is an aftermarket performance product & while it will bolt directly to the factory manifold mounting studs, it will require supporting modifications to install. Some examples of these modifications (but not exclusive to, as every application can be different) are moving, blocking, or re-routing some of the factory coolant hoses & vacuum lines. Installing an oil filter relocation kit, throttle cable made to suit your application, Using top feed 14mm o-ring sealed full length injectors. This product should be installed by an experienced & fully qualified mechanic.
We can provide you with a custom throttle cable made to suit your application. Contact us to find out how!
This manifold is made with aluminium & due to the nature of the material it can sometimes have imperfections in the finish. Heat marks from welding (which is a sign of good penetration) & light scratching/ machining marks. For the best finish we recommend the black anodising as the silver anodising is a clear one & can sometimes make these machining marks more obvious.
These manifolds are made to order & tested before being sent out to make sure you are getting the best quality. Because of this procedure we have in place, your manifold ETA is 6-8 weeks after placing your order & payment is cleared. During times of the year that surround public holidays or celebrations (Christmas, New Year, Easter, etc.) there may be a further delay on this.
Otaku Garage Intake Manifolds are designed for off road use only. If you choose to use them in your street car that is at your own discretion.
Bulk Orders & Dealers:
We are always looking for more dealers to sell our products! Please contact us at [email protected] to apply to become a dealer.